Aviom 6416o User Manual download pdf (Page 70)

61re A r PA N e l Fe A t u r e s

RS-232 Configuration DIP Switches

RS‑232 communication is configured using the first eight switches in the DIP

switch block. Switches 1‑4 set the baud rate and switches 5‑9 are used to set

data, parity, and stop bit options. Switches 9 and 10 are reserved for system

use.

Switch Function Off On

1 Baud Rate bit 3

See Baud Rate chart

2 Baud Rate bit 2

3 Baud Rate bit 1

4 Baud Rate bit 0

5 Data Bits 7 8

6 Parity Low/High No parity Parity

7 Parity Even/Odd Even Odd

8 Stop Bit 1 2

9 Reserved

10 Control Master

To set a DIP switch to the On position, push it upwards.

RS-232 Baud Rates

To set a baud rate, determine the appropriate baud rate for data transfer

by referring to the external send/receive devices’ documentation. Set both

devices to communicate using the same baud rate. Finally, set the Pro64

devices to the same baud rate and activate the VDCs using the front‑panel

interface.

The 6416o is set for a 57,600 baud RS-232 transfer with 8 data bits, no parity,

and stop bit set to 1. (Black indicates the switch handle.)

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 95 96

No comments

Aviom 6416o User Manual Page 70