Aviom 6416dio User Manual download pdf (Page 59)

49Fr o N t PA N e l Fe A t u r e s

To link a pair of channels, both channels must be active rst.

Channels linked as stereo pairs will be indicated on all connected analog or

digital output modules in the Pro64 network, even when the channels are

muted on an output module.

Stereo channel link information will also be transmitted to Pro16 devices such

as the A‑16II Personal Mixer that are connected to the Pro64 network via the

ASI A‑Net Systems interface.

Managed Button

The Managed button is used to put the network under control of a computer

for firmware updates, system monitoring, etc. Managed Mode can only be

engaged from the network’s Control Master.

When using a PC for firmware updates, etc., a Pro64 module cannot have

its RS‑232/422 (or MIDI port, if applicable) assigned to a VDC while the PC

is connected. Deactivate VDC assignments of this type before entering

Managed Mode.

To enter Managed Mode, press the Ma n a g E d button; its LED will flash. The

Enter/Cancel LED will also flash. Press En t E r to confirm the mode change or

Ca n C E l to return to the previous state.

To exit Managed Mode, press the Ma n a g E d button; its LED will flash and the

Enter/Cancel LED will flash. Press En t E r to confirm the mode change. The

network returns to the previous local mode, Auto or Manual.

In Managed Mode, Virtual Data Cable and channel Active buttons behave as

if the module is edit locked; they provide information only when pressed. All

other front panel edits are prohibited.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 112 113

No comments

Aviom 6416dio User Manual Page 59