search

Aviom AllFrame User Manual Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 111
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 70
59
C4m mi C /li n e in P u T Ca r d
Click the lO w Cu t button to activate; the yellow LED in the selected channel strip will light to indicate that the
function is enabled. Click lO w Cu t again to turn the filter off.
The Low Cut filter can also be controlled from a Yamaha device using m-control. The filter’s on/off state is saved
with a Device Preset as well as globally when a project is saved.
Click the Low Cut button in a channel strip to turn the filter on/off.
Pad
To lower the level of the selected C4m input channel by 24dB, click the PA D button. Since changes to the overall
level of a channel caused by the use of the Pad can cause abrupt changes in level, confirmation is required to
complete the operation. In the dialog box that appears, click ye s to proceed with the edit or click NO to exit
without making a change.
When the 24dB pad is in use, the Pad LED in the selected channel strip will be lit. When using m-control to control
the C4m from a Yamaha device, the preamp’s Pad will turn on/off automatically in response to gain change
messages from the Yamaha device, allowing the full range of the Aviom mic preamp to be accessed remotely.
Pro64 Network Manager Device Presets save the Pad state for each channel.
+48V Phantom Power
Phantom power for devices such as condenser mics is available for each mic preamp channel.
Avoid potential damage to your hearing or audio equipment by muting the mic channel first if you are unsure
about the use of phantom power.
To turn phantom power on, click the +48v button once. In the dialog box that appears, click ye s to proceed with
the edit or click NO to exit without making a change.
To turn a channel’s phantom power off when it is enabled, click the +48v button. In the dialog box that appears,
click ye s to proceed with the edit.
When phantom power is enabled, the selected channel strip’s +48V LED will be lit. The on/off state of the +48V
phantom power is saved for every channel in each Device Preset. Phantom power on/off can also be controlled
from a Yamaha device when using m-control.
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 110 111

Comments to this Manuals

No comments
  • Aiko Simpson Electric Escort-group-itc-escort Multimedia Standard Mobi Technologies
  • Motorola LCD TVs Foxconn Motherboards Bush DVD players Palm Operating systems Caliber Car audio amplifiers
  • Samsung SGH-P100 Lenovo ThinkPad Edge E440 Canon PIXMA TS9541C Insignia NS-AV511 Sony ICD-PX232
  • Intel 240gb User Manual Makita HR4013C Use and Care Manual Parkside PNTS 1300 C3 User Manual Danfoss VLT 8000 AQUA Operations Instructions