Aviom Pro64 User Manual download pdf

Pro64Pro64Pro64

®®®

Quick Start Quick Start Quick Start

STEP 1: Place Pro64 devices in each location.

STEP 2:

Connect the devices in any order (Auto Mode).

Use any combination of serial and parallel connections. Add the MH10f for fiber.

For more advanced set-up instructions, refer to your Pro64 Series User

Guides or contact Aviom Customer Service at +1-610-738-9005 ext 2.

STEP 3: Set any one input or output device as the Control Master.

To make a device the Control Master, set DIP switch #10 to ON.

–If you are using the Pro64 network clock, use any device other than a 6416Y2.

–If you are using a Yamaha® console as the clock, use a 6416Y2 in that console.

–If you are using an external clock, see reverse for more information.

STEP 4: Assign A-Net® Slot ranges for each I/O device.

Use the buttons on the front panels to set each device to its

16-channel bank (1-16, 17-32, 33-48, 49-64). Press ENTER to confirm.

Power on all devices. The Control Master will be indicated by a red LED. All devices that

have successfully joined the network will have a blue LED illuminated in the A-Net logo

on the front panel.

Active input channels are indicated by a green LED in the button. Active output channels are

indicated by a yellow LED in the button. If an input LED flickers, that A-Net Slot is already in

use. Note that changing the A-Net Slot range deactivates channels on that device.



CHECK

STEP 5: Activate channels on each I/O device to begin passing audio.

Turn on individual inputs and outputs with the front panel buttons.

1 2

Pro64Pro64Pro64®®® Quick Start Quick Start Quick Start Quick Start Quick Start Quick StartSTEP 1: Place Pro64 devices in each location.STEP 2: Conn

Additional InformationConnecting devicesAviom, A‑Net, the A‑Net icon, Pro16, Pro64, and Virtual Data Cable are trademarks of Aviom, Inc. All

No comments

Aviom Pro64 User Manual